DHP490 WVE/ Z 13 mm (1/2″) 18V Cordless Hammer Driver Drill

DHP490SFX1/ WVE/ Z 13 mm (1/2″) 18V Cordless Hammer Driver Drill

Features

• Overview:
  The DHP490 is a cordless hammer driver drill powered by an 18V LXT Li-Ion battery. Equipped with a powerful brushless motor, the tool delivers the maximum torque of 65 N·m. With its lightweight and compact design, the tool is easy to handle even in narrow spaces.
• The brushless motor provides longer work hours per charge and extended tool life.
• Provides increased efficiency with the maximum no-load speed of up to 1,900 rpm.
• The 20-stage torque settings allow for fine adjustments to suit the task at hand.
• A mechanical 2-speed gearing allows for choosing between maximum rpm or higher torque.
• Three action modes are available: Drilling, Hammer drilling, and Screwdriving.
• A single LED light with pre-glow and after-glow functions illuminate the work area.
• The variable speed trigger allows for speed adjustments based on the material or application.

• Specification

  

  Capacity	Masonry: 13 mm (1/2″) Steel: 13 mm (1/2″) Wood: 38 mm (1-1/2″)
  Max Torque	65 N·m (580 in.lbs)
  Max Output	460 W
  Chuck Capacity	13 mm (1/2″)
  Impacts Per Minute (IPM)	High: 0 – 28,500 | Low: 0 – 7,500
  Max Fastening Torque	Hard: 50 N·m (440 in.lbs.) Soft: 27 N·m (240 in.lbs.)
  No Load Speed (RPM)	High: 0 – 1,900 | Low: 0 – 500
  Dimensions (L x W x H)	172 x 81 x 237 mm (6-3/4 x 3-3/16 x 9-3/8″)
  Net Weight	1.4 – 1.7 kg (3.1 – 3.7 lbs)
  Available Options • SFX1 : 1x Standard Charger, 1x 3.0 Ah Battery, Makita Tool Bag • WVE : (LXT Basic) 1x Standard Charger, 2x 2.0 Ah Battery, With Carrying Case • Z : Without Charger & Battery